PRODUCT NAME: QUICK DRY FLOOR PAINT

Category: GUFANG Building Materials

I. PRODUCT POSITIONING

Suitable for indoor floors such as warehouses, factories, self-built houses, etc. Simple renovation, quick renovation, meets requirements for dust removal and beautification.

II. KEY FEATURES

• Excellent hiding power, meets job site requirements;
• Quick-drying, can be used by pedestrians the same day;
• All-in-one formula, can be used as primer and topcoat;
• Water-based, eco-friendly, healthy and odorless;
• Quick construction, saves time and effort.

III. SPECIFICATIONS

15kg/pail

IV. THEORETICAL COVERAGE

150 m²/pail/coat (coverage may vary depending on the substrate and coating method).

V. APPLICATION METHOD

Brush, spray, or roller application.

VI. DILUTION RATIO

If the construction viscosity is too high, add 5–10% clean water (the first coat can be diluted up to 35%).

VII. CONSTRUCTION PROCESS

Remove dust, oil, and other dirt from the floor. Apply 1–3 coats of the product.

VIII. DRYING TIME

Surface dry: 15–30 minutes
Recoat time: ≥ 2 hours
Cure time: Do not allow heavy traffic, water immersion, or rubbing before the coating is fully cured. Best performance is achieved after 7 days.

IX. APPLICATION CONDITIONS

The construction environment must have good ventilation, temperature > 5°C, and relative humidity < 85%.

X. STORAGE CONDITIONS

Store in a cool place between 5°C and 35°C, keep dry, well-ventilated, and avoid direct sunlight.

XI. BASIC INFORMATION